2002 Pacific Seacraft 37
|Propulsion Type||Single Inboard|
The layout below is spacious, well lit and well finished. Settee berths in the main saloon can double as sea berths.
Headroom is 6'-4" or better throughout the boat and storage capacity can only be noted as incredible. Beautiful hand rubbed teak joinery throughout with teak & holly cabin sole. The interior is finished with a satin varnish with accents on the trim. All deck hatches and sole opening hatches are banded in solid teak.
Sleeps up to six people in accommodations with the forward cabin, main salon and port side quarter berth cabin.
The unique forward cabin design is a signature of the Pacific Seacraft 37 and incorporates a 6'-6" long wide double offset berth to starboard with a comfortable dressing seat and vanity and mirror to port. There are 2 large hanging lockers, drawers, bookshelf, cabinets and storage bins and storage under the berth. There are 4-opening, screened ports, a double opening Bomar hatch for light and Hella fans for excellent ventilation.
Next aft to port is the head with storage compartments outboard and behind & under the sink. The head is ventilated with an opening portlight and weatherproof dorade. The head sole is teak grating. A varnished teak grate, which lowers over the toilet bowl, for a comfortable place to sit while showering. The inside of the head door is white formica with teak trim making the interior bright and easy to clean. Othe head features include hot & cold pressure water and electric shower sump pump with overboard discharge.
Amidships is the main salon which features a beautiful U-shaped settee and centerline teak table to starboard with built-in top opening lockers, fold out double leaves and removable fiddles. There is a teak hand hold on the forward bulkhead for safety. Opposite to port is the straight 6' - 4" settee with storage underneath. There are storage bins above settee along with a long fiddled bookshelf.
Aft and to starboard of the main salon is a traditional U-shaped galley that will delight the gourmet, whether at sea or dockside. There are 2-stainless steel sinks, fully gimbaled stove and generous counter space. Other features of the galley include two drawers, built in waste basket with laminated chopping block lid, extensive louvered lockers, large dry storage bin, large refrigeration and freezer compartment. This example includes the 4 optional large hanging storage lockers above the sink including racks for dishes.
Directly across from the galley, to port, is a proper offshore, forward facing navigation station and char
Newish Furuno GPS Chart Plotter with 12" display in pod
Newish furuno HD Radar
Robertson AP22 Autopilot 2002
Raymarine ST 60 - Wind Speed/Direction
Raymarine ST 60 Speed/Depth/Log
Remote Mic for VHF
At Nav Station:
Garmin 210C Chart Plotter (GPS)
Raymarine ST-60 Speed/Depth repeater
Newer Fusion Marine Stereo
Bose Indoor Speakers
Horizon Standard VHF
1-12Volt, AGM GP32, Starting Battery
3-12Volt, AGM, GRP32 Batteries
Xantrex Link Battery Charger & Monitoring System
Heart 1500 Inverter
Engine Room Lights
3-12 volt Outlets
Electric Bilge Pump
1-50 Shore Power Cord
Airex Marine Wind Generator
|Sails and Rigging|
Asymmetrical Cruising Spinnaker with Sock
|Deck and Handling Gear|
2 - Opening Gates
Newer Rocna Anchor with 275 feet Chain
1-Delta 30# Plow Anchor W/30 3/8 Chain & 150 5/8 Rode
1-Claw 30# Anchor W/130 5/16 HT Chain
|Mechanical and Propulsion|
MECHANICAL & PLUMBING
|Manufacturer's Equipment List|
Pacific Seacraft 37 Voyagemaker Specifications - Standard Equipment Construction - Hand laminated biaxial fiberglass hull & deck. First hull laminate uses vinylester resin for superior blister resistance. Standard molded-in gel coat color is Oyster White with Blue boot & sheer stripes. - Stainless steel chainplates & backing plates are caulked & thru-bolted to the hull. Solid teak rubstrake on hull. - Rudder with steel web frame supported by high strength manganese bronze gudgeon & closely coupled to steel-reinforced integral skeg. - Ballast is 6,200 pound (2.82 mt) solid lead casting with s.s. keel bolts. Keel to hull joint embedded in epoxy. - Interior is structural fiberglass, plywood & gel coat interior module bonded into hull with fiberglass mat & woven roving. Primary bulkheads bonded into hull & deck w-fiberglass then bolted in place. - Deck, lockers & bilge gel coated to prevent mildew & to facilitate cleaning. - Deck to hull connection: mating hull & deck flanges bedded in polyurethane adhesive & fastened with stainless steel thru-bolts. - Deck balsa cored. Plywood core in hardware mount areas. - Deck has molded-in nonskid pattern. - Ten year limited hull warranty. Deck Equipment - All cleats, winches, turning blocks, pulpits & stanchions have backing plates. Backing plates & hardware caulked with polyurethane. - 30" high, stainless steel double rail bow & stern pulpits with running lights and 30" high, double lifeline stanchions. - Stainless steel stem fitting with two anchor rollers & locking pins. - Divided bow chain locker for two anchor rodes. One deck pipe to port. - Deep bulwarks with heavy teak cap rail, hand fitted with butterfly joints. - Chrome plated bronze deck hardware includes: Two Harken #46.2 STC two speed self-tailing genoa sheet winches. One Harken #16 STC one speed, self- tailing mainsheet winch. Two Harken #16 STC one speed, self-tailing jib & main halyard winches. Four 7" x 12" & six 4" x 7" opening ports. CE approved. Two 12" & two 10" bow mooring cleats with 4" hawse pipes. Two 10" open spring cleats amidships. Two 10" stern mooring cleats with 9" chocks. One anchor deck pipe on foredeck, & one aft. - Designated cleats for each winch. Four teak loop handrails on cabin house. - Two 19" Bomar double opening hatches with screens. CE approved. - Two Vetus dorade box cowl ventilators. - Fiberglass seahood, teak companionway sliding hatch & drop boards. - Harken ball bearing mainsheet traveler over companionway hatch. - Harken deck organizers & Spinlock rope clutches. - Inboard & outboard genoa tracks with Harken lead cars. - Stainless steel boarding gates, port & starboard with double lifelines. - Stern chain locker to starboard w-deck pipe & anchor roller fairlead. - Stern mounted s.s. swim ladder with teak treads, boarding gate & overboard retrieval line. Interior - teak woodwork. White Formica cabin house sides. - Louvered locker doors & solid drop doors with hidden hinges. - Louvered cabin door (top half only) & panel head door with piano hinges. - Chrome bronze push button locks on all locker door & drawers - 6' 4" headroom with teak & holly sole throughout cabin area, all hatches & hatch openings in sole banded in solid teak. - Wrapped 4" foam cushions with choice of fabrics. - Zippered vinyl headliner for access to deck hardware & wiring. Forecabin - 6' 6" long & 50" wide double offset berth forward to starboard. - Dressing seat, vanity & mirror. Two cedar lined louvered hanging lockers. - Drawers, bookshelf, cabinets & storage bins. Fiberglass planking. - Enclosed head with teak shower seat, grate, & storage lockers. Main Salon - 6' 4" long "L" shaped dinette to starboard converts to 50" wide dbl. berth. - Starboard side has teak ceiling planks
|Manufacturer Provided Description|
|The Pacific Seacraft 37 is a superb high-performance cruising yacht that incorporates all the qualities an experienced sailor looks for in "a proper yacht," such as seaworthiness, premium quality, exceptional performance, comfort and beauty. She has a modern split keel and skeg rudder underbody. She's sleek, beautiful, and a brilliant performer in all conditions, as was proven by her remarkable and repeated performance in the recent Singlehanded Transpacific Yacht Race. She'll accommodate six and has features specifically designed for extended ocean voyages. The speed of the Pacific Seacraft 37 is already legendary, but performance in a cruising boat requires much more. A cruising boat must have a comfortable motion at sea and be well-balanced under sail so the crew does not have to fight the boat every yard of the way. The Crealock 37 was carefully designed for an easy motion. When you are shorthanded and you grow weary of those long night watches, a balanced boat can make a world of difference. In addition to her beauty, comfort, and sailing ability, the Pacific Seacraft 37 offers engineering and construction that is unsurpassed. Her fiberglass hull and deck are built to the most rigorous specifications, 100 per cent hand laid-up and squeegeed to remove all excess resin for optimum strength-to-weight ratio. Deck strength and insulation are increased with high-compressive-strength plywood core construction. Cored hull construction is available. Throughout the cabin, a soft white matte finish provides just the right counterpoint for the abundant hand-rubbed teak joinery. Sunlight and fresh air pour in from ten polished bronze opening ports and two large deck hatches.|
All personal items
Inflatable dinghy and outboard
|The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.|
For fastest response, please call or text Jonathan Smith, CPYB, at 860-514-3763 or email email@example.com
|Engine Make||Yanmar 4JH2E|
|Engine Model||Yanmar 4JH3E|
|Engine Type||Single Inboard|
The Pacific Seacraft Crealock is a well regarded cruising sailboat that is built for extended blue water cruising while also being easy enough to handle for easy day sailing. This two-owner cutter rigged version was set up for long-term cruising by its first owner with wind generator, SSB, davits and 6-person liferaft. Purchased in 2012 by its current owner, she has been used as an inshore cruiser and floating summer cottage. Recent upgrades include new Furuno GPS Chartplotter, HD Radar, AIS, Fusion stereo, asymmetrical cruising spinnaker and 275' of anchor chain. Please view the video tour linked within this listing.