1967 Chris-Craft Roamer Riviera
|Category||Antique and Classics, Pilothouse|
|Propulsion Type||Twin Inboard|
Master Stateroom - Queen Berth
Second Stateroom - 3 Single Berths
Once again it is hard to put words to all the inside accommodations this Chris Craft offers. It has a nice size salon with 25 flat screen, a full galley with (3) burner ceramic electric stove, Washer / Dryer and two heads, one aft and one forward. The aft master stateroom is laid out with his and her sides and features a queen size bed and lots and lots of storage. The forward stateroom is set up as an office but easily converts to three bunk beds.
|The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.|
|Speed and Distance|
|Engine Type||Twin Inboard|
1967 CHRIS CRAFT ROAMER RIVIERA
PROJECT BOAT - ADD YOUR TOUCHES AND MAKE HER YOURS.
NEEDS ENGINE WORK - NO GENERATOR
The boat is being sold as-is. It has been sitting on the hard for 2-1/2 years, so will probably need batteries. The rudder posts are leaking, and at least one of the rudder tie bars will need to be replaced. This will have to be done before the boat can be put back in the water. The exhaust was removed from the starboard engine to check for overheating problems and will need to be reassembled (needs gaskets as well). The port engine was running 2-1/2 years ago but it has not been started since. There are leaks in the starboard side cabin windows. The interior will need to be redone.
It is wired for a generator, but the generator has been sold and does not convey with the boat. The diesel heater does not convey with the boat.