2019 Mako 204 CC

 The versatile and dependable MAKO® 204 CC is ready for everything from patrolling the beaches to targeting sailfish. The aggressive Deep V hull slices through choppy seas, and the hull/deck joint is chemically bonded and mechanically fastened with stainless steel fasteners every 6"—it's truly built stronger than it has to be. Besides being a superior offshore fishing machine, the 204 CC features bow seating at port and starboard with fishboxes beneath, a forward-console cushioned seat with a 21-gallon baitwell beneath, and a large in-floor storage compartment—making it perfectly welcoming for both fishermen and families.

• Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
• Foam-injected hull w/1-piece fiberglass stringer grid
• Hull/deck joint chemically bonded & fastened 360° w/316 stainless steel fasteners
• 124-qt. (117 L) in-floor storage compartment
• Under-gunnel port & starboard rod racks
• Center console w/analog gauges, electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
• 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
• 2 pedestal helm seats & forward console seat w/21-gal. (80 L) baitwell
• Port & starboard bow seating w/80-qt. (76 L) insulated fishboxes w/gravity drains
• Custom-matched, tandem-axle aluminum trailer w/brakes

• Length:20' 4"
• Beam: 8' 4"
• Bottom width: 6' 7.5"
• Max. recommended HP: 225 HP
• Fuel capacity: 87 gal.
• Max. person capacity: 8 persons
• Max. person weight: 1450 lbs.
• Max. person, motor & gear weight: 2300 lbs.
• Interior depth: 25"
• Transom height at center line: 25"
• Deadrise: 18 degrees
• Draft: 12"
• Dry weight: 2635 lbs.
• Average hull weight: 2000 lbs.
• Average package weight: 3435 lbs.
• Package height: 8' 8"
• Package height w/T-top or hardtop: 10' 1"
• Storage length: 28' 9"

Certification & Safety

• Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
• NMMA® certified
• Factory leak tested for hull, plumbing & fitting integrity
• Stainless steel hardware & fasteners for corrosion resistance
• CorrosionX stainless spray treatment included
• Horn

Console

• Binnacle-mounted motor control
• Gauge panel w/analog gauges
• Heavy-duty electrical switching system w/battery selector switch(es)
• Easy access to helm electronics, instruments & switches
• Forward-console seat w/21-gal. (80 L) baitwell
• Integrated full-width footrest
• Acrylic windscreen
• Marine-grade tinned wiring w/submersible connectors
• 2 console drink holders

Construction & Exterior

• 100% composite construction
• Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
• 1-piece molded fiberglass stringer grid w/integrated transom knee supports
• Closed-cell foam-injected stringer grid for USCG-approved flotation
• Premium marine-grade stainless steel hardware
• Heavy-duty rub rail & insert
• Closed-molded hatch covers w/finished undersides & integrated gaskets
• Aluminum backing plates for cleats, chocks & hinges
• Reboarding step & stainless steel grab handle
• MAKO® Bone White gelcoat

Electrical, Mechanical & Plumbing Systems

• USCG-compliant navigation lights
• Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Interior

• Anchor locker
• Foredeck dodger mounting boss
• Port & starboard bow seats w/80-qt. (76 L) fishboxes w/gravity overboard drainage
• 124-qt. (117 L) in-deck storage compartment
• Low profile stainless steel bow rails
• 2 pedestal helm seats w/slide & swivel
• Self-bailing cockpit
• 2 gunnel-mounted rod holders
• Port & starboard under-gunnel rod racks for 6 rods
• Molded non-skid surfaces throughout
• Bilge access hatch
• Port & starboard molded-in swim platforms
• Six 6" (15.24 cm) polished marine-grade stainless steel cleats

Performance

• Legendary dry-riding MAKO® hull
• Aggressive deep V hull design
• Performance lifting strakes
• Factory-matched propeller

T-Top or Hardtop

• .25" (.64 cm) aluminum backing-plate reinforcement for T-top mounting

Trailer

• Tandem-axle EZ Loader® aluminum trailer
• NMMA® certified trailer
• DOT approved
• Tandem-axle brakes
• 13" (33.0 cm) radial tires w/galvanized V5 wheels & galvanized axle
• Oil bath hubs
• Leaf spring suspension
• Heavy-duty winch w/nylon strap & safety strap
• Stainless steel hardware
• Galvanized steel components
• LED lighting
• PVC loading guides
• Composite fenders