2015 C&C 30
30'Annapolis, MDLocal Delivery Available
More Photos and Video to Come
Hull #23 of the very popular C&C 30 One Design. SUPRA is the best example of a race ready C&C 30 on the market today. She has been very successful racing in One Design Class events as well as doing Coastal Distance Races and local Club Regattas.
SUPRA's bottom and hull were professionally faired and prepared by the team at Beasley Marine in 2018 and painted and clear coated with ALEXSEAL Yacht Coatings and polished for the fastest bottom, hull and foils possible. The bottom and foil fairing means this will be the fastest boat in its class on the water.
SUPRA was commissioned with electronics installed by YachtSoft out of Connecticut. Her B&G instruments are as well installed, calibrated, and managed as any Grand Prix program today.
Outfitted with inshore and offshore sails by class leader Quantum Sails, SUPRA can hit the starting line tomorrow.
Dimensions
Tanks
Electronics
- B&G H5000 Hercules System
- 4 Mast Mounted B&G H5000 Graphic Displays
- Custom Carbon Fiber Mast Mount for Displays
- B&G Vulcan7 GPS/Chartplotter Display in Cockpit
- B&G Speed/Depth Transducer Faired into HUll
- NMEA2000 Networking and data hook up for computer.
- B&G Wand and Wind Equipment
Sails
- 2016 Quantum Fusion M Code 2 Jib
- 2016 Quantum Fusion M Code 2 Jib
- 2016 Quantum A1.5
- 2016 Quantum A3.5
- 2016 Quantum Mainsail
- 2015 Quantum Mainsail
- 2015 Quantum Fusion M Code 1 Jib
- 2015 Quantum Fusion M Code 2 Jib
- 2015 Quantum Fusion M Code 3 Jib
- 2015 Quantum A1.5
- 2015 Quantum A2
Factory Equipment
- Trailer - High/Low Galvanized Steel with Hull Formed Bunks
- 2 Large Trailer Boxes
- Seadek 5mm Nonskid in Cockpit
- Canvas Package - Topgun with Mesh Cockpit Tail Bags and Topgun Lifeline Pads
- Powdercoated Stanchions and Pulpits
- Harken Carbo Foil
- Hydraulic Mast Jack
- Second Battery
- 12v Bilge Pump
- Pipe Berths Port/Stbd
- Molded Keel Clam Shell and Lifting Straps
Custom Upgrades
- Kinder Canvas Fenders, Boom Bag, Mast Bag, Spreader Bag, Rudder Cover, Spinnaker Trampoline, Forward Hatch Cover, Sprit Cover
- Carbon Fiber Spinnaker Roller
Deck Gear
• Primaries: 2 x Harken 40.2 PT
• Backstays: 2 x Harken 35.2 ST
• Handles: 3 x Harken
• Custom Bow / Stern Pulpits with Running Lights
• Stanchions: Tapered S/S with Braces
• Lifelines: Dyneema Upper & Lower
• Rope Clutches, Spinlock
• Jib Leads, Athwartship In/Out Up/ Down
• Controls Below Deck to Trimmer
• Jib Cunningham Below Deck to Trimmer
• Cunningham 5:1 & Outhaul 8:1 lead aft to pit
• Mainsheet: 16:1, Coarse Tune / Fine Tune
• Traveler 4:1 to Main Trimmer
• Vang, Spectra 16:1
• Tackline to Spinlock Clutch
• Foredeck Hatch Lewmar 22” Dia Round
• Accessible Port on Cockpit Face for Lines
• Composite Tiller with Tiller Extension
Rig and Rigging
• Hall Spars Carbon Fiber Rig: Two Sets Swept Spreaders – supports Rig Without Backstays
• Carbon Bow Sprit, Removable for Docking & Transport
• Halyard Locks for Main & Primary Jib
• Aluminum Boom with 8:1 Outhaul & Provision for 1 Reef
• Two Dyneema Topmast Running Backstays
• Shrouds: 1 X 19 S/S Wire
Electrical
• 12v DC Distribution Panel
• Main Battery Switch
• Battery 70 RC/55 AH Deep Cycle (Second Battery Optional)
• Alternator 115 Amp ORC Approved
• Navigation Lights
• LED Overhead Lights
NPYS Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.