Year
1946
Make
Monk
Model
Custom 65
Class
Cutter
Length
65'
Fuel Type
diesel
Location
Port Ludlow, WA 98365
Hull Material
wood
Offered By
Pop Yachts
1946 Monk Custom 65
Stock #253674 -
Only 80 photos shown. All 104 photos available on popyachts.com/view/253674
This is a beautifully restored Ed Monk design that clearly shows excellent original craftsmanship and detailed care during the restoration project.
The salon / galley area is equipped with a gimble 3 burner propane stove and oven, a large refurbished refrigerator with a new Nova Kool remote condenser and cold plate, along with a gimbaled table that is hung from above. There is plenty of cabinet storage, a large stainless steel sink,
The engine room is quite spacious for a boat like this, even access below the engine is provided.
There are crew quarters in the fore area, just behind the sail storage area. These berths are currently being used as ... [click "Watch the video" under Resource Links to visit our website for full description]
Please submit any and ALL offers - your offer may be accepted! Submit your offer today!
Reason for selling is moving to hawaii.
Pop Yachts is a 5-star dealership, consistently given the highest ratings in customer service. Pop Yachts sells more than 1,700 boats/year, through word of mouth, customer referrals and good customer service. Contact Pop Yachts today, describe the perfect boat for you or your family, and you'll see why they are considered the best.
You have questions? We have answers. Call us at (941) 914-9217 to discuss this boat.
Selling your boat has never been easier. At Pop Yachts, we literally sell thousands of units every year all over the country. Call (855) 201-8801 and we'll get started selling your boat today.
Only 80 photos shown. All 104 photos available on popyachts.com/view/253674
This is a beautifully restored Ed Monk design that clearly shows excellent original craftsmanship and detailed care during the restoration project.
The salon / galley area is equipped with a gimble 3 burner propane stove and oven, a large refurbished refrigerator with a new Nova Kool remote condenser and cold plate, along with a gimbaled table that is hung from above. There is plenty of cabinet storage, a large stainless steel sink,
The engine room is quite spacious for a boat like this, even access below the engine is provided.
There are crew quarters in the fore area, just behind the sail storage area. These berths are currently being used as ... [click "Watch the video" under Resource Links to visit our website for full description]
Please submit any and ALL offers - your offer may be accepted! Submit your offer today!
Reason for selling is moving to hawaii.
Pop Yachts is a 5-star dealership, consistently given the highest ratings in customer service. Pop Yachts sells more than 1,700 boats/year, through word of mouth, customer referrals and good customer service. Contact Pop Yachts today, describe the perfect boat for you or your family, and you'll see why they are considered the best.
We have several active listings for Chris-Craft, Sea Ray, Silverton, and Pacemaker. If you're in the Seattle, Tacoma, Bellevue, or Kent areas, please use the form on this page to let me know what you're looking for and I'll get back with you today about any other cutter sailboat options we have locally that may meet your needs.
You have questions? We have answers. Call us at (941) 914-9217 to discuss this boat.
Selling your boat has never been easier. At Pop Yachts, we literally sell thousands of units every year all over the country. Call (855) 201-8801 and we'll get started selling your boat today.
Show More
Speed & Distance
Cruising Speed
6.08kn
Max Speed
7.82kn
Dimensions
Nominal Length
65ft
Length Overall
65ft
Max Draft
9ft
Beam
13ft
Weights
Dry Weight
35,000Lb
Tanks
Fresh Water Tanks
150gal
Fuel Tanks
100gal
Accommodations
Single Berths
4
Engine Make
Detroit Diesel
Engine Model
GMC 4-71
Engine Type
inboard
Fuel Type
diesel
Condition
During the restoration, over 100 new laminated Oak frame sections were installed, and the hull was refastened with silicon bronze fasteners. There are also some unique construction components for this boat, separating it from most boats of this vintage. One of the most significant are the 16 foot Galvanized Iron Shear Clamps port and starboard in way of the Chain Plates that provide strength and prevent hogging. The owner, who is an experienced vintage boat restorer, says there is zero hog on this boat, and he reports that structurally the refurbishment is 100% complete. The laminated spruce mast was refurbished with the scarfs opened and new epoxy applied, then re-stepped. The owner indicates it is more waterproof than it has ever been. The teak decks appear to be in very good condition, recently refurbished and sealed. The brightwork is also in very good condition, and the hull is shiny and bright following the restoration and refinishing. Everything was taken down to the bones and refurbished with professional care. The owner confirms the engine runs strong. GMC service manual is included. According to the seller, tThe current status of the restoration is as follows... Stainless steel Genny Tracks (port and starboard) need to be reinstalled 24 volt off-shore charging system needs to be installed (all components have been purchased and are included) Anchor light installation (LED) needs to be finished Some other LED lights remain to be installed Raytheon radar system needs to be installed Depth sounder (needs to be installed at next haul-out) Speed indicator (needs to be installed at next haul-out) Analog speed system (original) can be rebuilt
Navigational Equipment
- Autopilot (None, Mechanics And Electrical Supply Are Ready For Installation)
- Compass (Multiple)
- Navigation Lights
- VHF
- Handheld GPS
- Depth Sounder (Ready For Installation)
- Speed Indicator (Ready For Installation)
- Compass (Multiple)
- Navigation Lights
- VHF
- Handheld GPS
- Depth Sounder (Ready For Installation)
- Speed Indicator (Ready For Installation)
Mechanical
- Water Tanks (Two - 150 Gallon Copper (1 Used As Stash Area))
- Fuel Tank (Black Iron)
- Rudder (Keel Hung)
- Number Of Eng Cylinders (Four)
- Fuel Tank (Black Iron)
- Rudder (Keel Hung)
- Number Of Eng Cylinders (Four)
Electrical Systems
- 3 12V Deep cycle batteries, 2 in series for starting, one stand alone for house battery. Windlass 12V battery is upfront in close proximity.
- 12 V Off-shore Charging
- 24 V Off-shore Charging (Components Included)
- Inverter (Dual 12v & 24 Volt Installed)
- 12 V Off-shore Charging
- 24 V Off-shore Charging (Components Included)
- Inverter (Dual 12v & 24 Volt Installed)
Accommodations
- Heat (Dickenson Diesel Heater)
- Head
- Cold Plate
- Refrigerator
- Salon
- Shower
- Sink - Galley
- Forward Berths
- Mid Berths
- Stove / Oven
- Head
- Cold Plate
- Refrigerator
- Salon
- Shower
- Sink - Galley
- Forward Berths
- Mid Berths
- Stove / Oven
Construction
- Port And Stbd Iron Shelf (16-feet, Galvenized)
- Ring Frames (Stern Construction)
- Hull refastened with silicone bronze
- Ring Frames (Stern Construction)
- Hull refastened with silicone bronze
Deck Gear
- Anchor (Large Plow, Small Danforth Off Stern, Lunch Hook)
- Anchor Locker
- Anchor Rode
- Cover - Full Boat (3 Piece And Full Side Curtains)
- Bow Rail
- Cockpit Seating
- Compartment Storage
- Helm Wheel
- Top Tier Bottom Pain (Gallons Included)
- Anchor Locker
- Anchor Rode
- Cover - Full Boat (3 Piece And Full Side Curtains)
- Bow Rail
- Cockpit Seating
- Compartment Storage
- Helm Wheel
- Top Tier Bottom Pain (Gallons Included)
Safety Equipment
- Owner's Manual (Engine)
- Spotlight
- Fire Extinguishers
- Life Jackets
- Grab Rails
- Spotlight
- Fire Extinguishers
- Life Jackets
- Grab Rails
Sails
- Covers - Sail (Recent Mainsail)
- Genoa (160%, Light Weight Drifter)
- Main Sail
- Spinnaker Sheets
- Jibs (3)
- Spinnaker
- Genoa (160%, Light Weight Drifter)
- Main Sail
- Spinnaker Sheets
- Jibs (3)
- Spinnaker
Rigging
- Backstay (Standing And 2 Running)
- Boom (Laminated Spruce)
- Boom Vang
- Chain Plates (Galvanized Iron)
- Mast (80 + Feet, Laminated Spruce)
- Running Rigging
- Spinnaker Pole (Bronze Fittings Only)
- Standing Rigging (Stainless)
- Winches - Manual
- Lifelines
- Boom (Laminated Spruce)
- Boom Vang
- Chain Plates (Galvanized Iron)
- Mast (80 + Feet, Laminated Spruce)
- Running Rigging
- Spinnaker Pole (Bronze Fittings Only)
- Standing Rigging (Stainless)
- Winches - Manual
- Lifelines
Total Power
100.0 hp
%
years
$
Estimated Total: $XXX/month
