Fraud Awareness Tips
Offered By
Albers Marine
(866) 559-5042
- Vertical rod holders at the console also feature covers to keep water out when you?re not using them
- Port and starboard aft mooring cleats are made up stainless steel for maximum durability.
- You can fold down the gunwale cleats to prevent snagging fishing lines.
- The aft deck lockers are designed to keep your gear dry throughout your trip.
- Dry storage lockers are located port and starboard in the aft casting deck.
- The aft deck features a non-skid surface and two dry storage lockers.
- The helm station is loaded with convenience features
- The console switches put control of such functions as the bilge pump at your fingertips.
- A storage area is also found under the console.
- The flip-flop helm seat has a 72-quart (68.14 L) cushioned cooler.
- Vertical rod holders on both sides of the console keep your rods at the ready.
- The console also comes with a stainless steel grab rail and windscreen.
- At-a-glance gauges include tachometer
- The bow deck houses a large storage compartment.
- Two cup holders are conveniently located at the forward console seat.
- The console baitwell is aerated to keep your bait healthy.
- The bow locker is perfect for storing the optional anchor kit.
About this 2011 Mako 18 LTS Inshore Freshwater Fishing
2011 Mako 18 LTS Inshore- Completely bonded and lined hull/deck assembly
- Deep ventilated step hull w/integrated transom knee laminated into hull
- Flip-flop helm seat w/72-qt. (68.14 L) cushioned cooler
- Center console w/analog gauges, removable windscreen, grab rail, stainless steel steering wheel and vertical rod holders
- Forward console seat w/18-gal. (68.14 L) aerated baitwell
- Raised fore and aft casting decks w/watertight storage compartments w/close-molded lids
- Stainless steel cleats and bow and transom eyes
- Self-draining deck
- Aluminum single-axle trailer w/EZ lube hubs
The Mako 18 LTS is a whole other breed of bay boat.
It takes the features, ride and versatility of larger craft and perfectly melds them with the maneuverability and shallow draft of an inshore boat. The patented Rapid Planing System not only pushes the 18 LTS up on plane in record time, but it can do it in only 24" (60.96 cm) of water! All with less horsepower! And for fishing versatility, no other boat even compares. Generous bow and stern platforms are perfect for sight casting. If you prefer to stalk your fish through extreme shallows, you can get the optional poling platform, push pole and holders.
For even more big-boat performance options, optional trim tabs, jack plates and hydraulic steering are ready to take your bay fishing trip to the max. However you choose to outfit your 18 LTS, this light tackle skiff is built to impress with its smooth ride, long list of features and all-around versatility.
Boat Details
| Class: | Power | Hull Material: | fiberglass |
|---|---|---|---|
| Category: | Freshwater Fishing | Fuel Type: | Gas |
| Year: | 2011 | Hin: | BUJ60915D111 |
| Make: | Mako | Location: | Arma, KS |
| Length: | 19' | Horsepower: | 90 |
| Propulsion Type: | Other |
- Length: 18' 6"
- Fuel Capacity: 33 Gallons
- Package Length: 20' 10"
- Deadrise: 20 degrees
- Draft: 11"
- Beam: 7' 7"
- Weight (approx.): 1000 Lbs.
- Package Weight (approx.): 2000 Lbs.
- Max. Person Capacity: 5 Persons
- Transom Height: 25"
- Max. Weight Capacity: 1100 Lbs.
- Max. Person Weight: 610 Lbs.
- Max. Recommended HP (Single): 90 HP
- Comfort, Safety & Convenience
- Stainless steel bow & stern eyes
- 18-gal. (68.14 L) forward-console livewell w/padded seat cushion
- 2 stainless steel cup holders
- Stainless steel destroyer-style steering wheel
- Step-up surface for sighting
- Stainless steel grab rail
- 6 vertical flush-mounted rod holders
- Panel-mounted control w/power trim
- Removable contoured windscreen
- Battery storage
- Award-winning Rapid Planing System hull design provides a quicker holeshot, easier planing in shallow water & is designed to run a 20" (50.80 cm) shaft motor on the 25" (63.50 cm) transom
- Marine-grade vinyl & composite substrates on seats
- Non-skid decks & gunwales
- Stainless steel hardware throughout
- Fully molded composite liner w/integrated bow & stern platforms
- 100 percent composite construction
- Hand-laid hull & deck
- Heavy-duty rub rail
- Pressure-foamed hull/liner structure
- Available w/optional 2-tone hull
- 1,000 GPH (3,785.41 LPH) bilge pump w/auto switch
- Molded-in, high-speed water pickup for livewell
- Navigation lights
- 1,000 GPH (3,785.41 LPH) bilge pump w/auto switch
- Teleflex no-feedback steering
- Stainless steel gas fill w/integral vent
- Stainless steel gas fill w/integral vent
- Non-skid decks & gunwales
- Stainless steel bow & stern eyes
- Lockable compartment w/battery switch
- Aft dry storage lockers
- Anchor locker
- Flip-flop helm seat w/72-qt. (68.14 L) cushioned cooler
- Center bow storage locker
- Custom single-axle EZ Loader trailer
- Aluminum I-beam construction
- Galvanized steel components
- LED lights
- Oil bath hubs
- PVC loading guides
- Radial tires on galvanized V-5 wheels
- Stainless steel hardware
- Swing-away tongue
- Tongue jack
- Torsion axle suspension
- NMMA certified
- DOT approved
- 7'7"
- 1000
- 5
- gallon
- Mercury
- 2011
- 90
- 90 optimax
- Mako Boats
- 5 year
- Modified Vee
Disclaimer:
We employ best efforts to present accurate pricing, specifications, features and availability for models shown on this site. On occasion, data transmission errors may produce anomalies in information presented. Should you have questions about what you see here, your dealer will be able to confirm correct availability, model content and pricing. Inventory shown is subject to prior sale or transfer to another location.Notes:
Seller Information [ contact the seller ]
Albers Marine
403 north hwy 69[ view map ]
po box 1005
Arma, KS
(866) 559-5042
Contact Seller
