2006 J boats J 100 Racer in Youngstown, NY

• View Photos
• Watch Boat Clips

SELLER DESCRIPTION

Blue hull beauty, Tac Tic, Tiller pilot, Excellent sails, Stereo, Always freshwater, 1 owner, Perfect gentleman's daysailor

Mechanical Equipment:
2 cylinder 15HP yanmar diesel saildrive engine with Gori geared folding prop. Engine instrument panel with tachometer, engine hour gauge and water, oil pressure alarms in cockpit with acrylic cover. Engine throttle control with neutral safety switch.10-gallon fuel tank with baffles and inspection/clean out port. Balanced hi-aspect spade rudder constructed using "E" glass and large diameter shaft mounted in ACC composite rudder bearings. Curved laminated wood tiller with Spinlock tiller extension.

Electrical System:
One 95 amp AGM Lifeline 27 battery. 12V DC battery switch. 12V DC electrical distribution panel w/ 8 circuit breakers. Navigation & steaming lights. UL approved stranded, tinned copper ABYC color-coded wiring. Bonding system to meet ABYC regulations.Two swiveling halogen reading lights. One dome light in main cabin. One fluorescent light in head. Automatic electric bilge pump and panel switch for manual operation.

Deck and Hull Equipment:
Lloyd's approved, CK-57AL-600 Baltek Contourkore end grained balsa composite construction using biaxial and unidirectional glass fabrics with vinylester resin on outer hull layer. TPI patented SCRIMP? resin infusion system molding process for optimum laminate strength with 65-70% glass content in structural skins. TPI 10 year transferable warranty against hull blistering. White gel coat hull with single (1.75" to 3.25") tapered bootstripe. Large sit-in cockpit with 9.5' seats having comfortable 13.75" backrests, suitable for cockpit cushions. Two cockpit seat storage lockers. One lazarette storage locker. Swimming and boarding platform sculpted into aft face of full height transom with integral safety ladderMolded companionway seahood and dodger sprayshield bosses. Teak toe-rails with two scupper drains on aft side decks. Stainless steel handrails on cabin house. GRP molded main structural bulkhead, bonded to hull and deck as support for shroud chainplates with single opening to head and forepeak. SCRIMP molded longitudinal and transverse keel support beams and integral mast step. Lead & antimony fixed 5.75' draft, fin keel with bulb bolted to a deep molded sump. (4.0' shoal draft option)

Sails and Rigging:
Hall 152C tapered carbon fiber mast, autoclave cured with double airfoil aluminum spreaders, main, jib, spin halyard and topping lift sheaves, spin/whisker pole track with sliding eye on front of mast, Harken System "A" mainsail luff track; mast finished in Awlgrip off-white. G10 fiberglass mast step with fore/aft adjustment slots and SS padeye for through bolt securing of mast to step. Spartite mast wedge kit. Hall 128 section Aluminum boom with provision for 2 reefs, 6:1 internal mainsail outhaul, finished in Awlgrip off-white. Navtec continuous rod rigging with Navtec turnbuckles. Hall running rigging package with main halyard, jib halyard, two jib sheets, main sheet, single line reef (doubles as Cunningham), and traveler control lines. Sailtech remote panel hydraulic backstay adjuster. Hall B-12 Quik Vang with integral cleating. Harken Unit 0 headsail furler with control leading aft to cockpit.